Choose your country of delivery to see prices and products for your location.
Werkstoff
MARTENSITISCHE STÄHLE
Nach dem Gefüge werden Werkstoffe mit 10,5 - 13% Chrom und einem bestimmten Kohlenstoffgehalt (0,2 - 1,0%) dieser Gruppe zugeordnet. Es können weitere Elemente legiert werden. Das Verhältnis zum Kohlenstoff muß eine Wärmebehandlung, das Vergüten, zulassen. So sind Festigkeitssteigerungen möglich.
FERRITISCHE STÄHLE
Diese Werkstoffe haben Chromanteile von 12 - 18%, aber einen sehr niedrigen Kohlenstoffgehalt
AUSTENITISCHE STÄHLE
Ca. 17 - 26% Chrom, 8 - 25% Nickel garantieren austenitische Gefüge. Durch Molybdän von 2,5 - 6% wird die Rost- und Säurebeständigkeit erhöht. Festigkeitssteigerungen sind nur durch Kaltumformen zu erreichen.
SONDERWERKSTOFFE
Für spezielle Einsatzfälle wurden Sonderwerkstoffe entwickelt. Beispiele sind die sogenannten Duplex-Stähle, die durch ihre Zusammensetzung ein austenitisches und ferritisches Gefüge aufweisen. Sie enthalten 18 - 25% Chrom, 4 - 7% Nickel und 4% Molybdän. Auch Nickel-, Nickel-Kupfer-, Nickel-Chrom- und Sonderedelstähle auf der Basis Chrom-Nickel gehören hierzu. Unter bestimmten Werksnamen wie Cronifer, Nikrofer, Alloy, Ferrotherm, Hastelloy, Incoloy, Inconel, Monel u. a. werden spezielle Werkstoffe mit spezifischen Eigenschaften angeboten. Auch diesen Stählen sind Werkstoff-Nummern zugeordnet (chemische Zusammensetzung).
NE-METALLE
Aluminium, Messing und Kupfer sind Werkstoffe, die heute ebenfalls zur Anwendung kommen. Die Auswahl wird unter Berücksichtigung der Anwendungsfälle und der Technologien getroffen, z.B.: Cu Zn 37 - Umformtechnik; Cu Zn Pb 44 - Zerspanung. Die Werkstoffe werden in verschiedenen Festigkeiten geliefert.
TITAN
Bei höchsten Korrosionsanforderungen kommen Titan-Werkstoffe zum Einsatz. Unterschiedliche Zusammensetzungen und Festigkeiten stehen zur Verfügung. Durch die spezifische Dichte des Werkstoffes wird der Leichtbau ein wichtiges Anwendungsgebiet.
WERKSTOFF-TABELLEN
Die DIN ISO 3506 legt die technischen Lieferbedingungen für Verbindungselemente aus nichtrostenden Stählen fest. Die nachfolgende Tabelle zeigt eine Übersicht der einzusetzenden Werkstoffe. Die Norm wurde nach Bestätigung durch die Mitgliedsländer 1992 verabschiedet. Die vorgeschriebene chemische Zusammensetzung der nichtrostenden Stähle enthält die nachstehende Tabelle:
Chemische Zusammensetzung der vorwiegend benutzten rost- und säurebeständigen Stähle
Werkstoff- gruppe |
Stahl- gruppe |
Chemische Zusammensetzung in % 1) | |||||||
C | Si | Mn | P | S | Cr | Mo8) | Ni | ||
Austenitisch | A1 | 0,12 | 1,0 | 2,0 | 0,20 | 0,15 bis 0,35 | 17,0 bis 19,0 | 0,6 | 8,0 bis 10,0 |
A2 | 0,08 | 1,0 | 2,0 | 0,05 | 0,03 | 17,0 bis 20,0 | - | 8,0 bis 13,0 | |
Austenitisch | A4 | 0,08 | 1,0 | 2,0 | 0,05 | 0,03 | 16,0 bis 18,5 | 2,0 bis 3,0 | 10,0 bis 14,0 |
Martensitisch | C1 | 0,09 bis 0,15 | 1,0 | 1,0 | 0,05 | 0,03 | 11,5 bis 14,0 | - | 1,0 |
C3 | 0,17 bis 0,25 | 1,0 | 1,0 | 0,04 | 0,03 | 16,0 bis 18,0 | - | 1,5 bis 2,5 | |
C4 | 0,08 bis 0,15 | 1,0 | 1,5 | 0,06 | 0,15 bis 0,35 | 12,0 bis 14,0 | 6,0 | 1,0 | |
Ferritisch | F1 | 0,12 | 1,0 | 1,0 | 0,04 | 0,03 | 15,5 bis 18,0 | - | 0,5 |
1) Maximalwerte, soweit nicht andere Angaben gemacht sind.
2) Schwefel kann durch Selen ersetzt werden.
3) Darf Titan _> 5 x C bis 0,8 % enthalten.
4) Darf Niob (Columb) und/oder Tantal _> 10 xC bis maximal 1% enthalten.
5) Darf Kupfer bis maximal 4 % enthalten.
6) Der Kohlenstoffanteil darf nach Wahl des Herstellers höher liegen, soweit dies, besonders bei größeren Durchmessern, zum Erreichen der mechanischen Festigkeiten erforderlich ist.
7) Molybdän nach Wahl des Herstellers zulässig.
8) Falls für bestimmte Anwendungen ein maximaler Gehalt erforderlich ist, muß dies bei der Bestellung vorgeschrieben werden.
By selecting "Accept all", you give us permission to use the following services on our website: , , "OSS Lieferland" Geo-Ip Service, releva.nz Retargeting, Doofinder, ReCaptcha. You can change the settings at any time (fingerprint icon in the bottom left corner). For further details, please see Individual configuration and our Privacy notice.
The settings you specify here are stored in the "local storage" of your device. The settings will be remembered for the next time you visit our online shop. You can change these settings at any time (fingerprint icon in the bottom left corner).
For more information on cookie lifetime and required essential cookies, please see the Privacy notice.
The Geo-Ip service is used only to determine the country from which the user is visiting this site in order to automatically display country-specific tax rates and prices.
Country determination for country-specific tax rates]]
Processing company:ip2c.org
Terms of use: LinkThis script helps us, to offer you relevant services and products on other digital platforms.
Names of set cookies: dmc-12, dmc-12-r
Cookie validity: dmc-12 (2 Jahre), dmc-12-r (2 Jahre)
List of cookie domains: hyj.mobi
Place of processing: European Union
dmc-12
dyn.: No
Expires: 2 years
Storage type: Cookie
dmc-12-r
dyn.: Yes
Expires: 2 years
Legal basis:
The legal basis for the processing of personal data required by Art. 6 I 1 GDPR is specified below.
- Art. 6 Abs. 1 s. 1 lit. f DS-GVO
Place of processing: European Union
releva.nz
Terms of use: LinkTo send data to Doofinder, you need to consent to the transfer of data and storage of third-party cookies by Doofinder.. This allows us to improve your user experience and to make our website better and more interesting.
Doofinder Conversion-Tracking
Processing company:Meta Platforms Ireland Limited
Terms of use: LinkTo submit forms on this page, you need to consent to the transfer of data and storage of third-party cookies by Google. With your consent, reCAPTCHA, a Google service to avoid spam messages via contact forms, will be embedded. This service allows us to provide our customers with a safe way to contact us via online forms. At the same time, the service prevents spam bots from compromising our services. After you gave your permission, you might be asked to answer a security prompt to send the form. If you do not consent, unfortunately you cannot use the form. Please contact us in a different way.
Would you like to see these contents? Activate the desired contents for one session only or allow the website to remember these settings. Once you have given your consent, the third-party data can be loaded. For this, third-party cookies might be stored on your device. You can change these settings at any time (fingerprint icon in the bottom left corner). For further details, please see the Privacy notice.